The summer season is approaching, and after children’s summer vacation, the passenger flow of children’s playground equipment disco wheel will increase significantly. The precautions for the operation of disco turntables in summer children’s play equipment are something that relevant operators need to be familiar with before officially starting work. Today, we will share with you three parts: pre operation, during operation, and after operation, hoping to be helpful to you.
Precautions for the operation of children’s playground equipment disco turntable 1: Before starting up and operating
1. On duty operators must undergo strict training and obtain certification before taking up their posts, and must possess proficient business operation skills.2. Clean and hygienic, there should be no debris on the platform.
3. Check for cracks and fragments on the turntable, and repair them promptly if necessary.
4. Check for any deformation, cracking, or other abnormal conditions in the weld seam.
5. Check for looseness and detachment of bolts and other fasteners.
6. Check for broken or exposed wires.
7. Check if the grounding connection is good.
8. Run the machine three times before starting up, and only after confirming that it is normal can it be officially put into operation.
9. Keep corresponding inspection records, report any abnormalities to relevant departments for repair as soon as possible.
Precautions for the operation of children’s playground equipment disco turntable 2: During startup and operation
1. When the children’s playground equipment disco turntable is running, the operator must stick to their post, stand up for service, and is strictly prohibited from leaving their post or wandering around.
Before ticket checking, the staff should explain the “Notice to Tourists” clearly to tourists, confirm whether tourists can take the disco wheel, advise tourists who are not suitable for playing to exit, and inform tourists of precautions for those who can play.
3. After ticket inspection, make arrangements for queuing and waiting for incoming tourists to ensure orderly and orderly play on site.
Tourists can only slide down after passing through the safety crossbar.
5. Pay attention to the arrangement of tourists, the interval time for sliding in sequence, and avoid collisions.
6. Always pay attention to the condition of passengers and equipment, and in case of emergency, stop operation in a timely manner to avoid accidents.
7. If inappropriate behavior is found among tourists, it should be stopped in a timely manner.
8. Regular inspections are conducted twice per shift, and the frequency of inspections is increased during holidays to ensure operational safety.
Precautions for the operation of children’s playground equipment disco turntable 3: At the end of operation
At the end of the operation of this shift, it is necessary to carefully hand over according to the regulations, explain the situation clearly, and keep records.
2. Conduct a closing inspection of the work site and children’s playground facilities.
3. Check for any forgotten items by tourists.
4. Check for hidden dangers such as ignition, flammability, explosiveness, and electrical leakage.
5. Check if the water system is functioning properly.
6. Check other prescribed matters in actual work.
7. Clean the site and equipment hygiene.
8. Check and confirm whether the entrance and exit guardrail doors and duty room doors and windows are intact.
9. Turn off the power, lock the entrance and exit guardrails and the doors and windows of the duty room.
10. Fill in relevant records and reports.
