As time goes by, children’s amusement equipment may fail due to equipment wear or human factors. If the children’s amusement equipment is not properly repaired and maintained, it will cause major problems with the children’s amusement equipment. Today we will share and discuss common failures and maintenance issues of children’s amusement equipment.
1. Common failures of children’s amusement equipment
(I) Failure of the oil pump of children’s amusement equipment
1. The oil pump cannot absorb oil: first check the oil pump filter to see if there is any dirt accumulation. If there is, the oil filter should be disassembled and cleaned in time to remove the dirt. If the oil is too dirty, replace it with new oil; if there is insufficient oil in the tank, add enough oil to the tank.
2. Oil pump leakage: check whether the sealing ring is intact. If the seal is not good, it can be replaced.
(II) Children’s amusement equipment cannot start normally
1. Check whether the circuit and voltage are normal. If the circuit is normal, check whether the instantaneous voltage at startup is normal. If the instantaneous voltage at startup is too low, consider whether it is necessary to increase the square number of the power live wire.
2. If the circuit and voltage are normal, check whether there is dust on the surface of the carbon brush and the conductive ring that causes poor contact. If this happens, the power should be turned off to clean the dust.
II. Maintenance of children’s amusement equipment
(I) Installation and maintenance of children’s amusement equipment
The installation and maintenance methods of children’s amusement equipment should be correct, and the details such as strength and scale should be accurately grasped to avoid errors, and also avoid the occurrence of wear caused by improper installation and maintenance operations.
(II) Regular inspection of children’s amusement equipment
Children’s amusement equipment should pay attention to inspection and maintenance work in normal times. Please conduct regular inspections of children’s amusement equipment in accordance with the requirements of relevant equipment materials, and fill in reports in a standardized manner for archiving. At the same time, if there are abnormal phenomena such as abnormal noise, odor, smoke and dust during the daily operation of the equipment, the equipment should be stopped for inspection according to regulations, and the problems should be solved in time.
(III) Lubrication of children’s amusement equipment
In order to avoid wear and tear of the parts of children’s amusement equipment, the staff needs to add lubricating oil in time to maintain the lubrication of the contact surface to reduce wear and increase the service life.
It should be emphasized that in the daily inspection and maintenance of children’s amusement equipment, there should be a sense of prevention. In the investigation of hidden dangers of children’s amusement equipment, it is necessary to check whether the connection parts of the equipment are firm, whether the metal frequently moving connection parts need to be refueled, whether the circuit electrical appliances and ordinary parts are damaged, whether there are thorns on the surface of the equipment, and other hidden dangers. Once found, they should be solved immediately. At the same time, according to regulations, relevant personnel should be organized to conduct emergency plan exercises regularly to know how to respond to sudden emergencies, not panic when they come, and reduce losses to a small and small level, so as to provide children with a safe and secure amusement environment.
